12 Ethernet & WiFi over CoAX
Τα συστήματα Ethernet/Wi-Fi over Coax αξιοποιούν την ελεύθερη χωρητικότητα της υπάρχουσας τηλεοπτικής υποδομής (καλώδια τηλεόρασης) επεκτείνοντας το δίκτυο σας σε κάθε σημείο του Ξενοδοχείου - Πλοίου - Νοσοκομείου κλπ.
Με αυτόν τον τρόπο μπορούμε να παρέχουμε
-πρόσβαση στο διαδίκτυο ή/και στο εταιρικό δίκτυο
-IP τηλεφωνία
-IP TV
-CCTV
-υπηρεσίες και εφαρμογές IoT
και πρακτικά οποιαδήποτε εφαρμογή/υπηρεσία υλοποιείται πάνω από IP χωρίς χωρικούς περιορισμούς.
Η αξιοποίηση της υπάρχουσας σταθερής υποδομής όχι μόνο ελαχιστοποιεί το κόστος ανάπτυξης του δικτύου αλλά επιπλέον διασφαλίζει την ομαλή μελλοντική αναβάθμιση (σε όρους απόδοσης) και επέκταση.
Με αυτόν τον τρόπο μπορούμε να παρέχουμε
-πρόσβαση στο διαδίκτυο ή/και στο εταιρικό δίκτυο
-IP τηλεφωνία
-IP TV
-CCTV
-υπηρεσίες και εφαρμογές IoT
και πρακτικά οποιαδήποτε εφαρμογή/υπηρεσία υλοποιείται πάνω από IP χωρίς χωρικούς περιορισμούς.
Η αξιοποίηση της υπάρχουσας σταθερής υποδομής όχι μόνο ελαχιστοποιεί το κόστος ανάπτυξης του δικτύου αλλά επιπλέον διασφαλίζει την ομαλή μελλοντική αναβάθμιση (σε όρους απόδοσης) και επέκταση.
-
SENDTEK Solutions
-
Wodaplug
-
Ignite - MOCA 3 GLinq
<
>
SENDEK Solutions
Τα συστήματα της SendTek αποτελούν την πλέον ευέλικτη λύση Ethernet/Wi-Fi over Coax. Λειτουργούν στη φασματική περιοχή 6-96MHz σύμφωνα με τα πρότυπα της ITU και υποστηρίζουν πραγματική ταχύτητα μεταγωγής έως 750Mbps. Οι λύσεις της SendTek καλύπτουν κάθε απαίτηση από μικρά δίκτυα 32 τερματικών (HPNA-χωρίς controller) έως και δίκτυα MDU/ΜTU 250 τερματικών ανά Controller (κάθε εγκατάσταση μπορεί να έχει πολλαπλούς controllers). Όλες οι μονάδες είναι πλήρως διαχειρίσιμες, υποστηρίζουν VLAN και Quality of Service. Επίσης διαθέτουμε τερματικές μονάδες VoIP Ready (SIP) με FXS θύρα. |
G.hn 2Gbps Coax MDU Wi-Fi Endpoint
THE COAX MDU WIRELESS ENDPOINT, CES-862, IS THE BROADBAND ACCESS DEVICE OVER THE EXISTING COAXIAL CABLE WITH WI-FI EXTENSION.
NO ADDITIONAL NETWORK WIRING IS NECESSARY. CABLE OPERATORS MAY JUST USE THE EXISTING COAX WIRING OF CABLE OPERATORS OR IN THE MDU BUILDING, THEN BE READY TO PROVIDE THE BROADBAND TRIPLE-PLAY SERVICES TO SUBSCRIBERS.. LOW INITIAL DEPLOYMENT COST. THE LOW INITIAL COST CAN EXPAND THE SERVICE TO SMALL SCALE BUILDING WITH HIGHER SPEED THAN CMTS. DUAL SUPPORT OF IPV4 AND IPV6 PROVIDE THE FLEXIBILITY FOR OPERATORS. WITH HIGH THROUGHPUT AND QOS, IT CAN OPTIMIZE TRIPLE PLAY SERVICES. AUTO PROVISIONING AND REMOTE MANAGEMENT. IT MINIMIZES THE INSTALLATION AND SUPPORT COST. THE UNIQUE ENDPOINT SERVICE CONTROL SUPPORTS SERVICE PROVIDERS WITH DIFFERENT SERVICE LEVELS |
Coax MDU Master Bridge
With In-Building Coax, Last Meters Distribution, Provides a Managed 2/1.6 Gbps, Ultra High Speed Service
Introduction
THE COAX MDU MASTER, CEM-839/8392, ENABLES CABLE OPERATORS TO START THE TRIPLE-PLAY SERVICES TO A BUILDING OR COAX SEGMENT.
NO ADDITIONAL NETWORK WIRING IS NECESSARY. CABLE OPERATORS MAY JUST USE THE EXISTING COAX WIRING OF CABLE OPERATORS OR IN THE MDU BUILDING, THEN BE READY TO PROVIDE THE BROADBAND TRIPLE-PLAY SERVICES TO SUBSCRIBERS.
LOW INITIAL DEPLOYMENT COST. THE LOW INITIAL COST CAN EXPAND THE SERVICE TO SMALL SCALE BUILDING WITH HIGHER SPEED THAN CMTS. DUAL SUPPORT OF IPV4 AND IPV6 PROVIDE THE FLEXIBILITY FOR OPERATORS.
WITH CEM-839/8392 HIGH THROUGHPUT AND QOS, IT CAN OPTIMIZE IPTV SERVICE.
AUTO PROVISIONING AND REMOTE MANAGEMENT. IT MINIMIZES THE INSTALLATION AND SUPPORT COST.
THE UNIQUE ENDPOINT SERVICE CONTROL SUPPORTS SERVICE PROVIDERS WITH DIFFERENT SERVICE LEVELS AND SERVICE SCHEMES.
NO ADDITIONAL NETWORK WIRING IS NECESSARY. CABLE OPERATORS MAY JUST USE THE EXISTING COAX WIRING OF CABLE OPERATORS OR IN THE MDU BUILDING, THEN BE READY TO PROVIDE THE BROADBAND TRIPLE-PLAY SERVICES TO SUBSCRIBERS.
LOW INITIAL DEPLOYMENT COST. THE LOW INITIAL COST CAN EXPAND THE SERVICE TO SMALL SCALE BUILDING WITH HIGHER SPEED THAN CMTS. DUAL SUPPORT OF IPV4 AND IPV6 PROVIDE THE FLEXIBILITY FOR OPERATORS.
WITH CEM-839/8392 HIGH THROUGHPUT AND QOS, IT CAN OPTIMIZE IPTV SERVICE.
AUTO PROVISIONING AND REMOTE MANAGEMENT. IT MINIMIZES THE INSTALLATION AND SUPPORT COST.
THE UNIQUE ENDPOINT SERVICE CONTROL SUPPORTS SERVICE PROVIDERS WITH DIFFERENT SERVICE LEVELS AND SERVICE SCHEMES.
Features
- Design for Operators Providing High Speed Service over Coax Network
- EoC up to 2Gbps/1.6Gbps PHY/Throughput Rate as Distribution Backbone over Coax
- Two 100/1000M Gigabit Ethernet Ports with One Port 100/1000Mbps SFP Support
- Up to 80dB Attenuation on Coax Network
- Support up to 16 Endpoints with Isolation for CEM-839
- Support up to 32 Endpoints with Isolation for CEM-8392
- Line Power Feeding by Coax or PoE
- IPv4 and IPv6 Support
- Endpoint Service Control and Bandwidth Control
- Endpoint Ethernet Loop Detection and Isolation
- Online Diagnosis Support
- DSCP/ToS/802.1p QoS and 802.1Q Tag VLAN Support
- IGMP Snooping Control
Wodaplug EOC Master 700Mbps |
Wodaplug EoC products are intended for the use of the existing infrastructure of cable television (CATV/STA) for sharing Internet access or high-speed data transmission-broadband. To transfer the data signal and the existing CATV (satellite TV) occurs at the same time after the same cable for mutual compatibility. You don’t have to change your CATV network! Just need to secure bi-directional throughput of your active network elements.
Simply apply the device to the involvement of the building to the Internet after a common coaxial divorce. Allows you to communicate the many units after a single coaxial lead signálovou at 700Mbps. Available also in the version with a power supply of the outdoor design of a coaxial cable or 220V. complaint to 700Mbps. |
Wodaplug EOC Slave + WiFi |
EOC1121R4WL-R410 modem is the EOC slave based on HomePlug AV solution for Ethernet access over coax. It works together with EOC master which is based on HomePlug AV solution as well to construct a two-layer Ethernet data transmission channel on CATV coax cable, provide the Ethernet access service based on the existing coax cable networking.
|
MOCA 3 GLinqThe IgniteNet GLinq is a powerful ethernet over coax converter that enables service providers to deliver gigabit speeds via existing and new coax cabling infrastructure. The GLinq system is ideal for both providing bandwidth to buildings with outdoor coax as well as delivering gigabit speeds within buildings using existing coax cabling infrastructure. Operators can already easily deliver gigabit speeds to customers wirelessly using IgniteNet’s 60GHz MetroLinq products – now they can also easily share that delivered capacity throughout the whole building. The unique GLinq + MetroLinq combination provides a clean, simple, fast installation of gigabit connections.
|